Filter
Top Products
15
Installation Instruction P/N 01 29 0 403 646
Procedure for Center Console Re-assembly:
1. Return center console (1) to vehicle and
secure using original hardware (2).
Note: Remember to reconnect eject-box
connections upon re-assembly.
2. Insert storage cup (1) into left interior of
center console. Confirm slots on storage cup
(2) are properly seated on 3 mounting tabs
inside console (3).
3. With the aid of finisher panel (1), align DVD
player so it is centered in finisher panel
cutout. Remove panel and tighten DVD
player bracket screws.
Note: It may be necessary to adjust the
height of the DVD player so buttons are
not depressed when armrest is closed.
With the aid of a flat edge (such as a
credit card) confirm DVD Player buttons
rest below ridge of trim bezel. If necessary
remove DVD Player and adjust player-to-
bracket mounting slots until player is
properly aligned.
4. Insert 3 locking clips (1) from kit into
underside of finisher panel (2) in selected
locations.