Filter
Top Products
- - - -
- - - -
- - - -
-
- - -
- - - -
- -
-
-
- -
- -
- - - -
INSTRUCTIONS
8.050
In
playing mode, short press OSO on remote control
to
show all information of present
disc.
9.
Number
Buttons
In
VCO mode, press 0-9 number button
to
input song. For example, you want to choose
13th song, press 10+ button, and then press 3 button once to play 13th song.
Note: This function can only
be
worked by the remote control.
10. Repeat Play
In
playing mode, press AMS/RPT button on remote control, to startup following, repeat
function. Single song repeat--. Repeat playoff.
Note:
1)
When playing
VCO
disc, if PBC is on, no repeat function.
2) After unit
is
power off or mode
is
switched
to
other playing mode except VCO mode.
if you switch back to VCO mode, repeat playing will
be
cancelled .
11.
Randomly
Play
In
VCO mode, press LOC/RDM button
on
remote control, to instantly play each song.
Press again
to
back to the normal play.
Note: When VCO disc, if PBC
is
on,
ROM
will not work.
12.
Switch
Track
In
VCO mode, press AUDIO button on remote control to switch track as following
sequence: Left - Right Stereo
t I
13. OPEN
Press OPEN button on panel to eject disc.
32
INSTRUCTIONS
14. PBC (MENU) Play
In
VCO mode, press this button then play the PBC and display will show whole menu
in
disc, work with number button to choose song. When you are playing either song
of the PBC, and you want
to
stop
to
select another song, press the button to turn off.
Note:
1) This function can
be
worked by the control.
2) PBC
is
suitable for the SVCO and VCO 2.0 disc.
3)
In
PBC mode, you can not press number button only to choose song .
15. VCO
Program
Playing
In
VCO mode, you can set playing sequence of songs by program play function.
The program playing operation steps are
as
follows:
In
VCO mode, press ST/PTOG button , display will show:
PROG
TC
TC
TC
TC
5 9
13
2 6
10
14
3
7
11
15
4 8
12
16
PLAY
DELETE
Input the songs which you want
to
programmed by the number buttons on remote control.
For
example: Program the first song, input your desires song, for example, the fourth song,
and press number button 4 on the remote control. Program the second song, press
T
button move the cursor to 2
____
. Input your desired song, for example, the eighth song,
press number button 8 on the remote control. Press
~I
button
to
program
play.
Back to
the normal mode, press the ST/PROG button, then press
~I
button .
Note: This function can only be worked by the remote control.
33