Filter
Top Products
INSTRUCTIONS
Contact book mode switching
You can touch this button under the Bluetooth mode to select the next mode.
Touch this function key to search the dialed numbers. Each time
this key is touched, the cursor will move to the next dialed number.
Touch this function key to search the received numbers. Each time
this key is touched, the cursor will move to the next received number.
Touch this function key to search the missed numbers. Each time
this key is touched, the cursor
will move to the next missed number.
Operations and Settings for the Bluetooth Function
1. Features
of
the Bluetooth function
1) You can use the function buttons on the unit to receive a call or dial a phone number.
2)
You
can directly use the hand-free microphone to talk on the phone.
3) You can use the build-in volume control switch to adjust the volume at will.
4)
You
can switch between the Bluetooth hand-free mode and the cell phone mode.
5) You can use your voice to dial a new number (valid only for cell phones with voice
dialing function).
6) With the Bluetooth function, you can use the Bluetooth microphone
in
the car to talk
with your folks and friends without having to hold your cell phone, so that your hands
are dedicated for driving, which is safer and law-observing.
In
the mean time, magnetic
radiation from the cell phone is avoided.
2. Bluetooth match conditions
You can shortly touch the Bluetooth function key _ under the main menu to directly
access the Blueetooth interface.
With a
cell phone that supports the function
of
Blueetooth wireless connection, you can
establish a connection between your cell phone and the automobile-loaded unit under the
Bluetooth mode to achieve date exchange and synchronization.
3. Matching and connections between the cell phone and the Bluetooth
of
the unit
Set your cell phone to the Bluetooth mode, and use the cell phone to search equipments.
After the Bluetooth equipment
of
the unit is searched, the cell phone will ask you for the
Bluetooth password. Press the unit matching setup button ..!!:!.. , and enter the Bluetooth
password (0000) and confirm i
t,
and then the cell phone will ask you whether you authorize
the connection with this equipment or not. Please select "YES", and the cell phone will be
automatically connected with the said Bluetooth equipment within 30 seconds. "OK LINK"
will be displayed on the Bluetooth interface to show that a connection between the cell
phone and the Bluetooth device has been successfully established. Under and mode
(radio,
TV,
OVO, etc.), if there
is
an incoming call to your cell phone which has been stably
connected to the Bluetooth device of the unit, the unit will switch
from
other mode to the
Bluetooth mode after the cell phone rings for about 10 seconds. Current mode will be
automatically restored after hang-up.
38
INSTRUCTIONS
20.0THER PLAY MODE
AUXIN:
AUX
IN
OPERATION
1) Press "Source" button on remote control
or
touch "AUX" on the touch screen, to
switch to AUX mode.
2)
This will allow you to listen and or watch any source that you have plugged into this
section
of
the radio.
3) This unit has 1 - Video RCA input & 1 pair
of
Audio RCA's for this feature.
CCD (Back-Up Camera)
1)
If there is a back-up camera installed onto your car, you will need to connect it to
the CCO video input.
2) When you are backing up the car there you will see this image
[TIl
on your screen.
3) You can set CCO image according to your car's own position
in
general setting mode.
39