Filter
Top Products
CAMCO USER MANUAL
VORTEX POWER AMP SERIES
P.11
3.1 On/off Switch
NOTE: This switch does not isolate the appliance from mains.
It initiates start-up by activating the inrush current limiter. When the amp is
connected to mains, only the line-lter and the input of the silicon controlled
rectier (fused) are energised.
3.2 Precautions
When mounting or connecting the amp always disconnect it from mains.
3.3 Mounting
Use four screws and washers when mounting the amplier to the front rack
rails. Rear support is also recommended, especially in mobile and touring use.
3.0 INSTALLATION
427,0 mm
436,0 mm
411,0 mm
76,2 mm
88,1 mm
442,0 mm
465,0 mm
76,2 mm
10,5 mm
10,5 mm