Filter
Top Products
CAMCO USER MANUAL
VORTEX POWER AMP SERIES
P.15
3.7 Input Signal Chaining
The input signals to the XLR connectors can be hard-wired in parallel using
a switch on the E.U.I. (See 3.6.2, Switch 1, 5.1, Extended User Interface and 5.1.1,
Input Signal Parallel Switch). This serves as a replacement for an external short
XLR female - XLR male cable for parallel linking the signal inputs.
CAUTION:
Linking channels together can cause damage to system components if for
example two inputs are used with separate ‘LF’ and ‘HF’ feeds.
If the amplier is to be used for ‘LF’ and ‘HF’, ensure this switch is set to
STEREO Mode before switching on.
3.0 INSTALLATION
Switch S1