Filter
Top Products
CAMCO USER MANUAL
VORTEX POWER AMP SERIES
P.4
1.0 Read Owner’s Manual
When shipping the VORTEX amplier, always use the original shipping carton
and packing materials. For maximum protection, repack the unit as it was
originally packed at the factory.
2.0 Environments
Use this amplier only in E1, E2, E3 or E4 environments according EN55103-2.
3.0 Ventilation
Slots and openings in the cabinet are provided for ventilation, to ensure
reliable operation of the product and to protect it from overheating. These
openings must not be blocked or covered. This product should not be installed
unless proper ventilation is provided or manufacturer’s instructions have been
adhered to.
4.0 Water & Moisture
Do not use this product near water (for example, in a wet basement or near a
swimming pool)
5.0 Cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid or
aerosol cleaners.
6.0 Power-cord Protection
Power-supply cords should be routed so that they are not likely to be walked on
or pinched by items placed upon them or against them, paying particular
attention to cords and plugs, and the point where they exit from the product.
7.0 Lightning
For added protection of this product during storms, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet. This will
prevent damage to the product due to lightning and power-line surges.
8.0 Object And Liquid Entry
Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short out parts that could result in a re or
electric shock. Never spill liquid of any kind on the product.
9.0 Accessories
Do not place this product on an unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury, and serious damage to the
product. Any mounting of the product should follow the manufacturers
instructions, and should use a mounting accessory recommended by the
manufacturer.
10.0 Connecting
When you connect the amplier to other equipment, turn off the power and
unplug all of the equipment from the supply source. Failure to do so may
cause an electric shock and serious personal injury. Read the owner’s manual
of the other equipment carefully and follow the instructions when making the
connections.
11.0 Sound Volume
Reduce the volume to minimum before you turn on the product to prevent
sudden high levels which may cause hearing or speaker damage.
12.0 Damage Requiring Service
Unplug this product from the mains supply and refer to your dealer/distributor
under the following conditions:
When the power-supply cord is damaged
If liquid has been spilled, or objects have fallen into the product
If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualied technician to
SAFETY