Clarion VRX385USB Car Stereo System User Manual


 
9
English
Owner’s manual
10
English
Owner’s manual
N BUTTON FUNCTION
To turn on/off the power (Press and hold this button more than 2 seconds.
If you press this button for more than 2 seconds while turning the power off,
the power of the unit will be turned on.)
To change the operation mode during POWER ON
To increase/decrease the volume
To play/pause the playback in the DVD/CD/MP3/iPod(AUDIO)/USB modes
To stop the playback (Press and hold this button for more than 2 seconds.)
To turn on/off the mute in the TUNER/AUX(VIDEO) modes
To switch to the previous screen
To switch reception band in the TUNER mode
To select the item or menu
To display an information (artist, genre, composer, etc) of the selected file in the
MP3 mode.(Disc mode only)
To store automatically to the PRESET channels in the TUNER mode
(Press and hold this button for more than 2 seconds.) : Auto Store
To display lists(file, track, PRESET, etc) in first screen of each mode
3. CONTROLS
Handling
New discs may have some roughness around its edges. If such discs are used, the player
may not work or the sound may skip. Use a ball-point pen or a similar object to remove
any roughness from the edges of the disc.
Never stick labels on the surface of the disc or mark the surface with a pencil or pen.
Never play a disc with any cellophane tape or other glue on it or with peeling off marks. If
you try to play such a disc, you may not be able to eject it from the DVD player or it may
cause damage to the DVD player.
Do not use a disc which has large scratches, misshapen or cracked exteriors, etc. The
use of such discs may cause improper operation or damage.
To remove a disc from its storage case, press down on the center of the case and lift the
disc out, holding it carefully by the edges.
Do not use commercially available disc protection sheets or discs equipped with stabilizers,
etc. Such use may damage the disc or cause breakdowns to the internal mechanism.
Storage
Do not expose discs to direct sunlight or heat source.
Do not expose discs to excess humidity or dust.
Do not expose discs to direct heat from heaters.
Cleaning
To remove finger-marks and dust, use a soft cloth and wipe in a straight line from the
center of the disc to the circumference.
Do not use any solvents, such as commercially available cleaners, anti-static spray, or
thinner to clean discs.
After using special disc cleaner, let the disc dry off well before beginning to play the disc.
On Discs
Do not exert strong force when inserting the disc into the insertion slot.
Ball-point pen
Roughness
Handling Discs