English
280-8177-00
VXZ756 37
3. Press the “ ” button to go to the option list
and press “ ” or “ ” buttons to select the
setting.
You can select the settings as shown in the
following table.
When you select “SMALL” for FRONT-SP,
setting for other speakers is subject to following
restriction.
• SRD-SP cannot be set to “LARGE”.
• SUB-WOOFER cannot be set to “OFF”.
• Only the following 4 patterns are available.
4. Press the [ENT] button.
5. Press the “ ” button to go back to the left
pane.
6. Repeat steps 2 to 4 to turn on/off each
speaker.
Changing Initial Settings such as Menu Language, etc.
FRONT-SP LARGE ∗
(Front speaker) SMALL
CENTER-SP SMALL ∗
(Center speaker) OFF
SRD-SP LARGE ∗
(Surround speaker) SMALL
OFF
SUB-WOOFER ON ∗
(Subwoofer) OFF
Asterisk (∗) indicates the factory default setting.
FRONT-SP
CENTER-SP
SRD-SP
SUB-
WOOFER
SMALL SMALL SMALL ON
SMALL SMALL OFF ON
SMALL OFF SMALL ON
SMALL OFF OFF ON
Setting the speaker gain
∗ If you select “OFF” for this function, you cannot
adjust the speaker gain.
∗ This function appears only when there is no
disc loaded or playback stops.
∗ The factory default setting is “OFF”.
1. Following the steps 1 to 3 in “Selecting the
monitor menu”, select “SP-GAIN SET” from
“AUDIO SETUP”, and press the “ ” button
to go to the option list.
2. Press “ ” or “ ” buttons to select “ON” or
“OFF”.
3. Press the [ENT] button.
Adjusting the speaker gain
∗ This function cannot be operated when the disc
is loaded or when “SP-GAIN SET” is set to
“OFF”.
∗ You cannot adjust the speaker gain for
speakers set to “OFF” in “SP-SEL”.
∗ The factory default setting is “0 dB”.
1. Following the steps 1 to 3 in “Selecting the
monitor menu”, select “SP-GAIN” from
“AUDIO SETUP”.
+VXZ756_01-25-Eng.p65 05.3.2, 3:43 PM37