Filter
Top Products
English
280-8177-00
VXZ756 39
Changing Initial Settings such as Menu Language, etc.
6. Press the [ENT] button.
Adjusting the dynamic range
This function allows you to adjust the dynamic
range, the ratio of the loudest sounds to the
quietest sounds.
∗ The factory default setting is “MAX”.
1. Following the steps 1 to 3 in “Selecting the
monitor menu”, select “DRC” from “AUDIO
SETUP”.
2. Press “ ” button to go to the right pane.
3. Press “ ” or “ ” buttons to select the setting.
You can select the dynamic range from
“MIN”, “STD”, or “MAX”.
4. Press the [ENT] button.
Setting the Dolby Pro Logic
Decode processing
You can set whether or not 2-channel source is
processed using Dolby Pro Logic Decode.
∗ The factory default setting is “ON”.
1. Following the steps 1 to 3 in “Selecting the
monitor menu”, select “Dolby PL” from
“AUDIO SETUP”.
2. Press “ ” button to go to the right pane.
3. Press “ ” or “ ” buttons to select “ON” or
“OFF”.
4. Press the [ENT] button.
Setting the down mix
∗ This function can be operated only when the
speakers other than FRONT-SP are set to
“OFF” in “SP-SEL”.
This function allows you to select the method of
down-mixing when the channel format and the
output channel configuration are not in
agreement.
∗ The factory default setting is “Lo/Ro”.
1. Following the steps 1 to 3 in “Selecting the
monitor menu”, select “DOWN MIX” from
“AUDIO SETUP”.
2. Press “ ” button to go to the right pane.
3. Press “ ” or “ ” buttons to select “Lo/Ro” or
“Lt/Rt”.
“Lo/Ro”: Down-mixing the discrete 5-channel
master etc. to 2-channel stereo track
“Lt/Rt”: Writing down matrix-encoded sounds
to 2-channel stereo track
4. Press the [ENT] button.
+VXZ756_01-25-Eng.p65 05.3.3, 7:59 PM39