Filter
Top Products
34
MAX685BT
English
Owner’s manual
Audio CD Operations
This system is a CD TEXT compatible model, and supports the display of the DISC TITLE, TRACK
TITLE, and TRACK ARTIST of the CD TEXT.
Note:
• This unit supports only CD TEXT in English. Also, some character data may not be reproduced properly on
the display.
Selecting the CDDA mode
1. Set an audio CD to the DVD player.
The system will automatically read the disc
data, change to the DVD mode (CDDA
mode), and start playback after a while.
See also “Setting/Ejecting a Disc” (page 20).
●When an audio CD is already set
1. Press the [SRC] button to display the Source
screen.
2. Touch the [DVD] key to select the CDDA
mode.
The system changes to the DVD mode
(CDDA mode), and starts playback from the
previous position.
Operating an audio CD
Listening to an audio CD
After disc loading, the play mode is automatically
engaged.
• When playback is not started, touch the [p]
key.
Pausing playback
1. Touch the [p] key during playback.
Playback pauses.
2. To resume playback, touch the [p] key.
Playback resumes.
Skipping a track (searching)
1. Press the [R] or [F] button during
playback.
Tracks are skipped, as many as the times the
button is pressed, and playback starts.
• Pressing the [F] button starts playback
from the beginning of the next track.
• Pressing the [R] button starts playback
from the beginning of the current track.
When this button is pressed again within
about 2 seconds, playback starts from the
beginning of the previous track.
• You can also use the [R] and [F] keys
instead of the [R] and [F] buttons.
Fast forward and fast backward
1. Press and hold the [R] or [F] button
during playback.
The playback speed becomes 4-time faster
first and then 16-time faster 3 seconds later.
Releasing the button resumes the normal
speed playback.
• You can also use the [R] and [F] keys
instead of the [R] and [F] buttons.
WARNING
• Some CDs may be recorded at a higher
volume level than desired. Increase the
volume gradually from the minimal
setting after playback has started.
• For your safety, the driver should not
operate the controls while driving.