Filter
Top Products
61
MAX685BT
English
Owner’s manual
General Settings
Displaying the General
Settings screen
You can customize the various settings of this
unit from the General Settings screen.
1. Press the [MENU] button.
The Menu screen appears.
2. Touch the [General] key.
The General Settings screen appears.
3. Touch the desired Tab key, and perform the
adjustment.
See the following sections for details.
• In the following sections, only the details
regarding adjustments are described,
procedures to select items are skipped.
4. When the adjustment completes, touch the
[Back] key to return to the previous screen.
Setting Camera Interrupt
When the optional CCD camera is connected to
this unit, the rear view image is displayed on the
screen when the gear lever is put in the reverse
gear position.
• The factory default setting is “OFF”.
Setting Camera Warning
The following warning message is displayed
during use of the CCD camera: “Make sure of
safety around your vehicle”.
• The factory default setting is “ON”.
Note:
• This setting is disabled when the Camera Interrupt
feature is set to OFF.
Setting the VTR system
(NTSC/PAL)
• The factory default setting is “NTSC”.
Note:
• This setting is applied only to the AUX video input.
Setting the Beep
The sound heard when you make operations is
called “beep”. The system can be set so that it
does not produce this beep sound.
• The factory default setting is “ON”.
Setting the Blink LED
When this function is set to “ON”, the Blink LED
indicator will blink when the ACC power is turned
off.
• The factory default setting is “OFF”.
3-1. Touch the [Display] key to display the
Display tab screen.
3-2. Touch the [ON] or [OFF] key of the Camera
Interrupt item to turn the Camera Interrupt
function on or off.
3-1. Touch the [Display] key to display the
Display tab screen.
3-2. Touch the [ON] or [OFF] key of the Camera
Warning item to turn the Camera Warning
function on or off.
3-1. Touch the [Display] key to display the
Display tab screen.
3-2. Touch the [NTSC] or [PAL] key of the
NTSC/PAL item to set the VTR system.
3-1. Touch the [System] key to display the
System tab screen.
3-2. Touch the [ON] or [OFF] key of the Beep
item to turn the Beep function on or off.
3-1. Touch the [System] key to display the
System tab screen.
3-2.
Touch the [
ON
] or [
OFF
] key of the Blink LED
item to turn the Blink LED function on or off.
• Setting the CATS function (see page 62)
turns on the Blink LED function as well.