Clarion NZ502 Car Stereo System User Manual


  Open as PDF
of 42
 
28 NZ502
English
English
Audio Setup Menu
Thismenuincludes:Balance,Fader,SelectEQ,Sub
WooferCtrl,SubWooferPhase,HighPassFilter,low
PassFilter,AmpCancelandMagnaBassEX.
Balance: Choose the desired volume for left and right
speaker.
Fader: Choose the desired volume for front and rear
speaker.
Select EQ:Choosethedesiredmode:BassBoost,
Impact,Excite,CustomandOFF.
Sub Woofer Ctrl:Choosethedesiredsubwoofergain
from 0 to 14.
Sub Woofer Phase: Choosethesubwooferphase
normal or reverse.
High Pass Filter: Choosethehighpasslter
through/55Hz/85Hz/120Hz.
Low Pass Filter:Choosethelowpasslter
through/62Hz/95Hz/135Hz.
Amp Cancel:Choosetheamplieraudiooutputon
or off.
Magna Bass EX: Choose the loudness on or off.
Navigation Setup Menu
Thismenuincludes:GPSTime,NaviInterrupt,and
VoiceGuidance
GPS Time: Set the system time to be synchronized
withGPSlocaltimeornot.
Navi Interrupt:Therearethreechoose:On/Popup/
Off.“On”:ThenavigationscreenwillcovertoAV
screenwhenreachingsomekeypoint.“Popup”:When
smallturninfowindowwillpopupinthetopofthe
AVscreentoindicatethekeypoint.“Off”:Turnoffthis
function.
Voice Guidance: Enable or disable the navigation
voice guidance.
Voice Guidance Mix:Therearetwochoose:On/Off.
“On”:Thenavigationvoiceguidancewillplayatthe
sametimeandthevoiceofthecurrentsource.“Off”:
Onlythenavigationvoiceguidance.(VoiceGuidance
On)
Others Setup Menu
Set password:SetthepasswordforDVDparental
control.
Parental control: Set the rating of the age. It contains
KidSafe/G/PG/PG-13/PG-R/R/NC-17/Adult.
Audio Language: Set the Language for DVD Audio.
Subtitle Language: Set the Language for DVD subtitle.
System Language: Set the Language for system
screen.
Blinking LED: SelecttheblinkingLEDOn/Off.
Screen Calibrate: The function of it is to select the TS
CalibrateYESorNO.
Factory Default: The function is to select to load
factory default or not.
 previous next