BASIC OPERATION
14
Setup item Range Default
Clock mode 12H/24H 12H
Panel detachable ON/OFF OFF
Beep ON/OFF ON
Clock display ON/OFF ON
Light in ON/OFF ON
LCD flash mode 0~14 14
LCD contrast 0~7 2
Note:
■ If there is no operation within 5 sec or the [DISP] button has been pressed for a little lon-
ger once more, the unit will exit the system setup mode.
SETUP BASS, TREBLE, BALANCE, FADER, LOUD
ANDSOUND EFFECT
■ Press the [SEL/LOC] button to select the audio mode according the following sequence:
Volume
Bass Treble Balance Fader Loud Sound effect Volume
BASS AND TREBLE CONTROL
■ In Bass or Treble mode, rotate the [VOLUME ADJUSTMENT] knob to increase or decrease
Bass/Treble.
■ If this button is pressed for more than 0.5 sec, the value will be continuously adjusted.
BALANCE AND FADER CONTROL
■ In Balance mode, rotate the [VOLUME ADJUSTMENT] knob, to shift the relative volume
to the Left or Right speaker system. In Fader mode, rotate the [VOLUME ADJUSTMENT]
knob, to shift the volume more to the Front or to the Rear speaker system.
■ If this button is pressed for more than 0.5 sec, the value will be continuously adjusted.
LOUDNESS CONTROL
■ In Loud mode, rotate the [VOLUME ADJUSTMENT] knob to activate or turn off the
Loudness function.
SOUND EFFECT CONTROL
■ In Sound Effect mode, rotate the [VOLUME ADJUSTMENT] knob to select a sound effect
according to the following sequence: Normal
FLAT JAZZ ROCK CLASSIC
POP
ZE-200DVD Manual E+D_c.indd 14ZE-200DVD Manual E+D_c.indd 14 26.05.2004 14:28:21 Uhr26.05.2004 14:28:21 Uhr