Filter
Top Products
23
DVD PLAYER SETUP
Set Audio Language
■ Most DVD’s support different audio languages. Select default audio language [AUDIO]
under section [PREFERENCE SETUP] in the main menu and then confirm with pressing
[ENTER]. If the disc that is played does support the selected language, playback will auto-
matically begin with the desired (pre-selected) audio language.
■ During playback, press the [AUDIO] button on the remote control to directly switch among
the languages present on the DVD disc.
Select Subtitle Language
■ Set the default subtitle language under [SUBTITLE] options.
■ Set the preferred subtitle language when the disc is not being played back.
■ During playback, press the [SUB-TITLE] button on the remote control to switch between
the different languages on the DVD disc.
Select TV Type
■ Set video systems in the section [TV TYPE] which is part of the options in the section
[PREFRENCE SETUP].
■ There are 3 options to choose from (see drawing below).
■ Select the video system according to the actual monitor type in use. Press the [ENTER]
button to confirm the selection. The chosen video system will be changed after exit of
the setup mode.
■ The [P/N] button on the remote control can directly change this option.
Note:
■ This operation can only work when no disc is played (stop state).
ZE-200DVD Manual E+D_c.indd 23ZE-200DVD Manual E+D_c.indd 23 26.05.2004 14:28:27 Uhr26.05.2004 14:28:27 Uhr