Durabrand PDV-722 Car Video System User Manual


 
IB-PDV722-WM-E-012007
POWER SUPPLY
B. Using the car adaptor (12V)
Insert the car adaptor plug to the DC IN
jack on the main unit and connect the car
adaptor to the vehicles 12V accessory /
cigarette lighter socket, the car adaptor
indicator will light up.
This player is supplied with a 12V car adaptor for powering the unit and recharging the battery
while in a vehicle that has a 12V power system.
1. Viewing movies only on the main unit
2. Viewing movies on the main unit and the slave unit at the same time
Insert the car adaptor plug to the DC IN jack on the slave unit and connect the car adaptor to the
vehicles 12V accessory / cigarette lighter socket, the car adaptor indicator will light up.
Insert one end of the supplied DC power cord to the slave units DC OUT jack and the other to
the main units DC IN jack.
CAUTION:
1.The included car adaptor is for use with this unit only. Do not use it with other equipment.
2. Use this unit only with the included car adaptor, using with other car adaptors could damage
the unit and the unit may not work.
3.Do not operate this unit or view video movies while driving a vehicle.
4. If some lines appear on the screen during the startup of the vehicle, please turn the unit off
and turn it on again after the vehicle is running.
5.Place the unit in a proper position for viewing.
6.When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may
become hot or not work due to poor contact. Be sure to clean the cigarette lighter socket before use.
7.Disconnect the car adaptor from both the unit and the cigarette lighter socket when the
battery is fully charged and the unit is not in use.
Main Unit
Slave Unit
Main Unit
DC power cord
10
IB-PDV722-WM-E-012007.pmd 2/12/2007, 1:19 AM11