Filter
Top Products
IB-PDV722-WM-E-012007
INITIAL SETTING
1 Press the SETUP button on the remote control, a
SETUP menu will appear on the TV screen.
4 When the setup has been done, press the SETUP
button to exit the SETUP mode.
SYSTEM SETUP (TV SYSTEM, LCD MODE, SLEEP CONTROL, TV TYPE, &
DEFAULT)
When using the DVD player for the first time, you may need to set some of the settings and
adjustments according to your TV and favorite preferences.
3 Press the OK button to confirm your selection.
2 Use the / / / direction buttons to
highlight your selection.
- PAL
A video standard. If the connected TV is PAL
system, select this mode.
- AUTO
If the connected TV is multi-system, select this
mode. The output format will be in accordance
with the video signal of the disc.
- NTSC
A USA video standard. If your TV is NTSC system,
select this mode.
You can get to the SETUP menu by following the below steps.
SYSTEM LANGUAGE
AUDIO
VIDEO
SYSTEM SETUP
TV SYSTEM
TV TYPE
SLEEP CONTROL
DEFAULT
EXIT SETUP
LCDMODE
Setting the TV SYSTEM (only when you are using your TV to watch the picture).
This allows you to set the aspect ratio of the LCD
screen.
Setting the LCD MODE
4:3
16:9
SYSTEM LANGUAGE
AUDIO
VIDEO
SYSTEM SETUP
PAL
AUTO
NTSC
TV SYSTEM
TV TYPE
SLEEP CONTROL
DEFAULT
EXIT SETUP
LCDMODE
SYSTEM LANGUAGE
VIDEO
SYSTEM SETUP
TV SYSTEM
TV TYPE
SLEEP CONTROL
DEFAULT
EXIT SETUP
LCDMODE
AUDIO
4:3
16:9
This allows you to fall asleep to a movie or music
disc and the DVD player will stop itself at a set time.
Setting the SLEEP CONTROL
NOTE: When the selected sleep time is reached
after play, the system will go into STANDBY mode.
SYSTEM
LANGUAGE
AUDIO
VIDEO
SYSTEM SETUP
TV SYSTEM
TV TYPE
SLEEP CONTROL
DEFAULT
EXIT SETUP
120 MIN
90 MIN
60 MIN
45 MIN
30 MIN
15 MIN
OFF
LCDMODE
24
IB-PDV722-WM-E-012007.pmd 2/12/2007, 1:20 AM25