Filter
Top Products
10. In the Add Device dialog, the path to the new firmware file is displayed in the Path
field.
Figure 12. Path to the New Firmware File on the Add Device Window
11. If this is the only device to which you are uploading firmware, click Add. The
DP DA2 information is added to the Devices section of Firmware Loader and the Add
Device dialog closes.
If you will be uploading the firmware to multiple DP DA2 units that are
connected to your computer, do the following:
a. Click Add Next. Your first device is added to the Devices section of Firmware
Loader, and the Add Device dialog remains open.
b. For each additional device you want to add to Firmware Loader, repeat steps 5
through 9, then click Add Next.
c. For the last device, click Add (instead of Add Next) to add the device and to
close the Add Device window.
DP DA2 • Updating Firmware 22