Extron DTP HD DA4 4K 230/330 and DTP HD DA8 4K 230/330 • Internal Web Pages 20
Reference
Information
This section provides information about updating the firmware of the DTP HD DA models.
The following topics are discussed:
z Using the Internal Web Pages
z Updating the Device Firmware
Using the Internal Web Pages
The DTP HD DA4/DA8 4K 230/330 Internal Web Pages allow for monitoring and set up of
the device via an Ethernet connection.
Accessing the Internal Web Pages
To access the Internal Web Pages:
1. Using an RJ-45 cable, connect the device to a LAN via the rear panel LAN connector
(see J on page 7).
2. Enter the device IP address into a Web browser address bar.