HANNspree AD32U Car Satellite TV System User Manual


 
ENGLISH
13
7 Once the automatic search ends, select
your location.
Note:
In Home mode, TV will be powered off •
automatically if there is no operations in 4 hours.
8 Press OK when initial setup is completed.
Selecting Your Content Source
You can watch cable or broadcast TV, play DVD or connect to your PC.
To select the source signal:
Press • Source on the remote control. The Input Source menu
appears.
Press • p/q to highlight the desired source, then press OK to
conrm.
Performing an Automatic Channel Search
BeforeusingtheTVtoviewprograms,youneedtoactivatethechannelsearchrst.
1 Press MENU on the control panel or press Menu on the remote control to enter the TV menu.
2 Select Tuner mode.
3 Select Channel install > Automatic search.
4 Select Country and press OK.
5 Select the signal type.
6 Press OK/u on the remote control to run the channel search.
Setting Up Your Favorite Channels
1 Press LIST.
2 Press the yellow button to enter Channel list selection. Press p/q to select the favorite list you
want to set up your favorite channels. Then press OK to enter the selected list.
3 Press the blue button to start to edit your favorite list. Press p/q to scroll through the channel list
and press OK to select it.
n Repeat this procedure to setup other favorite channels.
4 Press LIST/Exit to exit.
Initial Setup Location
Please select your location:
Home
Shop
Back Next Exit
Exit
Select
Initial Setup Complete
Back
Congratulations !!
Completed Initial Setup.
Please press [OK] to exit.
Source
TV
CMP
AV
VGA
HDMI1
HDMI2
HDMI3
No label
No label
No label
No label
No label
No label