HANNspree AD32U Car Satellite TV System User Manual


 
ENGLISH
19
Input settings
VGA Name
Set the device name
(No label/DVD/Blu-ray/HDD/DVDR/HD
rec./Game/VCR/PC/Digital STB/HD dig
STB/Camera/Recorder/Other).
HDMI1 Name
HDMI2 Name
HDMI3 Name
Decode Decode analog channels.
Diagnostics
Display the diagnostics information about the TV.
* Only available for digital channels.
Time Shift Enable/Disable the time shift feature (On/Off).
Reset
Reset all LED TV operational settings to the factory default
settings (OK/Cancel).
* Restores all settings to factory defaults, including Picture,
Sound, Password, Country, Language, and TV program settings.
Note: The options available on the OSD may vary depending on the input signal source.
Setup
Option Description
PAP
PAP
Enable/Disable the PAP feature (On/
Off).
TV position
(only available when
PAP is set to On)
Set the TV window position
(Left/Right).
Subtitle
Subtitle
Enable/Disable the subtitle
(On/Off).
Digital subtitle language Set the subtitle language for digital
broadcast.
Digital subtitle language
2nd
Subtitle Subtitle type Select the subtitle type mode (Normal/
Hearing impaired).
Decoding page language
Set the decoding page language for teletext display (Arabic/
Byelorussian/West EUR/East EUR/Russian/Russian-2/Greek/
Turkish/Arabic/Hebrew/Farsi).
Digital teletext language Set the teletext language for digital broadcast.
SPDIF type Select the SPDIF type mode (PCM/Off/Dolby D).
SPDIF Delay
(only available when SPDIF type
is set to PCM)
Adjust the SPDIF delay time to synchronize the sound with the
picture (0~1000).
T-Link
To search for CEC devices connected to the HDMI sockets of the
TV and enable one-touch play and one-touch standby between
CEC devices (On/Off).