HANNspree AD32U Car Satellite TV System User Manual


 
ENGLISH
17
Screen mode
Auto format
Enable/disable the aspect ratio selection automatically
(On/Off).
Advanced video
Noise reduction
Reduce the noise level
(High/Off/Low).
Light sensor
Enable/disable the light sensor to
detect the current level of visible light in
the surrounding environment
(On/Off).
VGA
(only shown on VGA source)
Auto adjust (Sychronize the display automatically).
H. Position
Adjust the position of the image left and
right (0~100).
V. Position Adjust the position of the image up and
down (0~100).
Phase Adjust to reduce horizontal noise
(0~31).
Clock Adjust to reduce vertical noise (0~255).
Active Contrast
Enable/disable Active Contrast function (Automatic backlight
control function based on average luminance of input pattern)
(On/Off).
* If Active Contrast was set as On, the ECO Dynamic back light &
Light sensor function will be disabled.
Note: The options available on the OSD may vary depending on the input signal source.
Sound
Option Description
Sound preset
Select a preset audio option optimized for different sounding
conditions (Rock/Pop/Live/Dance/Techno/Classic/Soft/Personal/
Off).
Balance
Adjust the sound balance between the left and right speakers
(-50~50).
Audio delay
Adjust the audio delay setting in millisecond (0~1000).
* This option is only available for digital channels.
Wide stereo Enable/disable the wide stereo feature (On/Off).
Auto volume control
Select to automatically adjust the volume.
* This option will only appear when the input source is TV.
Sound type Select the sound type setting (Stereo/Dual1/Dual2/Mono).
Type Select the sound type mode (Normal/Visually impaired).
Visually impaired
(only available when Type is set
to Visually impaired)
Speaker Turn on or off the speaker (On/Off).
Wide
Zoom 2
Stretch
Zoom