Filter
Top Products
ENGLISH
24
4. Troubleshooting
Situation Solution
No picture and sound.
Connect the power cord properly.•
Check if the power LED is on or not.•
Press •
on the control panel or remote control.
Press • Source on the remote control to select the
connected video sources.
Press • P
or P on the remote control or the control
panel to switch to other TV programs.
Make sure all cables are connected properly.•
No picture, or poor picture, sound
is OK.
Check the antenna and cable connections.•
Adjust the • Brightness in the Picture menu.
Picture is not in color. Try the • Picture preset function in the Picture menu.
Picture is OK, no sound.
Make sure the source device is functioning properly.•
Make sure the audio cable is connected securely.•
Turn the mute off.•
Press • VOL + on the control panel or
+ on the remote
control.
One of the speakers has no sound. Adjust the • Balance in the Sound menu.
Cannot receive some TV channels
using cable TV.
Try the • Automatic search function in the TV menu.
Want to reset TV settings. Use the • Reset function in the TV menu.
Cannot operate menus.
If OSD items are colored in gray, the system is in a state •
such that those settings are not available.
Screen image turns over. Make sure the video signal cable is connected properly.•
Snow appears on the screen.
Adjust the location of the antenna, placing it far from roads •
or sources of interference.
Check the antenna and the video signal line connections.•
Blurred or overlapped images.
Adjust the sharpness setting.•
Choose programs with high quality signals.•
Adjust the direction of the antenna or replace the video •
signal cable.
Remote control doesn’t work.
Make sure the battery is inserted correctly.•
Replace the battery with a new one.•
Make sure the TV power cord is plugged in.•
Make sure the path between the remote control and the •
sensor is clear.
Try operating the remote control at a closer distance to the •
TV.