HANNspree AD32U Car Satellite TV System User Manual


  Open as PDF
of 25
 
ENGLISH
14
Note:
The default password is 1234.•
Adjusting the ECO Dynamic Backlight
1 Press Menu on the remote control to display the main menu.
2 Select Picture > ECO Dynamic back light.
3 Press t/u to select the desired setting. At this time, the Picture preset option under Picture will be
set at Personal synchronically.
4 Press Exit to close the menu.
Using the PAP Function
1 Press Menu on the remote control to display the
main menu.
2 Select Setup > PAP and press OK/u to enter its
submenu.
3 To activate the PAP function, press t/u to select
On.
4 Press t/u to set the position of the TV window.
5 Press t/u to toggle the focus window.
6 When focus is on TV window, the digit buttons and P /P work in TV. When focus is on other
windows, P
/P can change available extension sources.
Customizing the Input Settings
1 Press Menu on the remote control to display the main menu.
2 Select TV > Input settings and press OK/u to enter its submenu.
3 Press p/q to select a connector your equipment is connected to.
4 Press t/u to select the device type that is attached to this connector.
5 Press Menu to return to the TV menu.
Note:
Afterconguringtheabovesetting,theselectedsourcelabelwillbedisplayedafterthenameselectedinthe•
source list.
Changing Your Location
1 Press Menu on the remote control to display the main menu.
2 Select Setup > Location.
3 Press t/u to select your location (Shop or Home).
4 Press Exit to close the menu.
Resetting to Factory Default Settings
1 Press Menu on the remote control to display the main menu.
2 Select TV > Reset and press OK/u to enter its submenu.
3 Use the digit buttons to enter the password.
4 Press◄/►toselectOK and press OKtoconrm.
5 The Initial setup menu appears. Follow the on-screen instructions.
Focus window position indicator
 previous next