Filter
Top Products
10
COMPONENT NAMES (continued)
Remote control (continued)
INPUT SELECT
Press this button to change input mode.
SOUND MODE
You may recall the sound mode by
pressing this button. Each time pressed,
sound mode is changed in following
sequence.
MusicMovie
SpeechFavorite
PROGRAM SELECT
Press these buttons to select a TV
program directly.
TIME (TV)
Pressing this button can indicate the
time by On-Screen display when
receiving a TV program on the screen
including TELETEXT service with the
time information.
CH I/II
This button is for A2 / NICAM models
only.
MULTI MODE
In multi-picture mode, pressing this
button will change the multi-picture
mode.
DVD and SAT *2
FUNCTION SELECT
Press this button to indicate function
mode with a lamp. *1
*1 FUNCTION SELECT button
This remote control has functions to control other makers of DVD player, DVD Recorder, and Set Top Box as well as this set.
Press the button to switch between TV, DVD and SAT modes.
Each time the button is pressed, the indicator will light below the function selected.
For details, refer to
.
*2 LED
The LED indicator lamps for DVD and SAT have 2 modes (Lit or blinking).
Lit: Indicates the mode that has been selected. Press the button to change modes when the LED is lit.
Blinking: Indicates that the maker of DVD or STB can be set. You can set up the maker of DVD or STB while the LED is still
blinking (30 sec). For details, refer to
.
43
43 44
ZOOM
Press this button can change Picture
size.
SWIVEL
Press this button to rotate TV. Use
cursor key () to select the degree of
rotation.
RECALL (TV)
With this button, the display change
between “--”, “---”, “-” and AV00 on the
top right hand corner of the screen.
“--” is for 2 digit channel selection, “---”
is for 3 digit channel selection and “-” is
for 1 digit channel selection.
RECALL (Video/RGB)
Press this button to display input signal.
MUTE
Press this button to turn off the set
sound. When press again or the
volume up button, the audio will be
restored.
DVD CONTROL
You can use these buttons to operate the
selected brand of DVD player.
FREEZE/RETURN
Press this button to change the picture
to freeze mode. Press it again to return
to normal picture.
PICTURE MODE
You may recall the picture mode by
pressing this button. Each time pressed,
picture mode is changed in following
sequence.
NaturalDynamic Cinema
MULTI PICTURE
Press this button to change the screen
to multi-pictures. Press it again to return
to normal picture.
PHOTO INPUT
These buttons are not available in this
model.