Filter
Top Products
14
If there are noise appearance in the picture of VHF-Low band channel, please use the double-shielded cable
(not provided) for RF LEADS to reduce the noise.
Precautions when connecting the antenna
• Please use a coaxial cable which is free from interference to connect the antenna. Avoid using a parallel flat
feeder wire as interference may occur, causing reception to be unstable and stripe noise to appear on the
screen.
• Avoid using indoor antenna as this may be affected by interference. Please use CATV net or outdoor
antenna.
• Keep the power cord as far away from the antenna wire as possible.
• For safety, install an external antenna conforming to AS1417.1 (applicable for Australia only)
INSTALLATION INSTRUCTIONS (continued)
Connection to an Audio Visual Device (continued)