Filter
Top Products
30
Selected characters WX Setup hint
Auto Tuning
Mode
Select the channel entry method between position setting or direct setting.
And press the OK button to fix it.
• If [Position] is selected, the screen display will be numbers (1~199 and
AV00).
• If [Direct] is selected, the screen display will be C** at the channel 0~99
and S** at the channel 100~199.
Search
Press the OK button and it starts the auto tuning.
Manual Tuning
Position
Set the position number (1~199 and AV00) or channel number (C**, S**) by
( + ) ( - ) CHANNEL UP/DOWN button.
Frequency
• If [Position] has been selected, search the frequency here by pressing
W and X buttons.
• If [Direct] has been selected, this function will be not available (grayed out).
Name
This is used to input the name of the TV station within 5 letters. After fixing
the cursor on the first digit, select a letter by T and S SELECT buttons and
move to next digit by X ADJUST button. Press the OK button again after
finished.
• Selectable letters are “0”~`”9”, ”A”~`”Z”, “+”, “–”, ” ”(blank), ”,”(comma) and
”.”(period).
Sound System
Select the sound system through the 5 different settings.
Color System
Select the color system through the 5 different settings.
Skip
If this is set to On, that position will be skipped while selecting positions by
CHANNEL UP/DOWN button.
This is automatically set to On for those non-broadcasting channels.
NR
If this is set to On, it helps to reduce the noise interference visible on the
screen, especially in the weaker signal reception areas.
Antenna Att
If this is set to On, it helps to reduce the noise inter ference visible on the
screen in case of strong airwave.
Fine Tuning
Decreasing the frequency data
for the main tuner
Increasing the frequency data for
the main tuner.
After completing the fine-tuning, press the RETURN button to exit this mode.
• The variable range is -56 ~ +56.
Sort
(When the Mode in Auto Tuning menu is set to [Direct], this function will be not available (grayed out).)
(A Line of position List)
Press OK button at a line that is required to change order, then the
characters will change to green. And move it up or down in the list by
pressing S and T SELECT buttons. And press OK button to complete it.
Press the RETURN button to exit.
Teletext Language
Select the teletext language, depending on the area utilized, through the 4
settings; West Europe, East Europe, Cyrillic and Greek/Turkish.
• Select West Europe when watch in Singapore, Australia, Malaysia, and so
on.
Auto Off
If this is set to On, the power will be turned off when there is no transmission
signal and no operation for about 10 minutes in the TV mode.
OPERATING INSTRUCTIONS (continued)
SETUP MENU (TV mode) (continued)