Filter
Top Products
20
• Input can be switched by pressing the AV1~6, RGB1 or
RGB2 buttons of the remote control.
• Input can be switched to TV by pressing CHANNEL
UP/DOWN button or PROGRAM SELECT buttons.
• Input can be switched in the sequence of TV AV1
AV2 AV3 AV4 AV5 AV6 RGB1 RGB2 by
pressing the INPUT SELECT button of the control panel.
Each time the ZOOM button of the remote control is
pressed, the screen display size will change in sequence
and the status will be displayed at the bottom of the screen.
• During TV/VIDEO signal input (AV1, AV2, AV3, AV4, AV5,
AV6, RGB1(set to [DVI-STB])and RGB2(set to [Compo-
nent]))
• The size will fix as Full mode and not change when receiving the
component signal of 1080i/50, 1080i/60 or 720p/60.
Display size selection diagram
OPERATING INSTRUCTIONS (continued)
CHANNEL UP/DOWN buttons
INPUT SELECT button
Input Switching
TV AV1 AV2 AV3 AV4
RGB2 RGB1 AV6 AV5
RGB2 RGB1 AV6 AV5
Size Switching
Panoramic
Cinema
Full
Zoom
4:3
Full
INPUT SELECT
buttons
ZOOM button
RECALL button
CHANNEL
UP/DOWN
button
PROGRAM
SELECT
buttons
When you want to Set the display size to Input signal Display screen Remarks
Play a 4:3 image in a 16:9 screen faithfully.
4:3
(4:3 signal)
Blanking occurs on both sides.
Play a 4:3 image in a 16:9 screen with the
height and width of the middle of the screen
enlarged on equal scales and with both sides
appearing somewhat enlarged.
Panoramic
Play a 16:9 VISTA size image in the 4:3 image
faithfully reproduced on the 16:9 screen.
Zoom
(Vista)
• The 4:3 image is called a letterbox
image.
• In some cases, some slight blanking may
remain at the top and bottom.
Play a 21:9 Cinema size image in the 4:3
image expanded vertically on the 16:9 screen.
Cinema
(Cinema)
In some cases, some slight blanking may
remain at the top and bottom.
Play a 4:3 image faithfully in a 16:9 screen in
the standard vertical size and horizontally
squeezed.*
Full
(Squeeze)
* An image with an aspect ratio of 16:9
shrunk horizontally to 4:3 to display in a
4:3 screen