Filter
Top Products
56
Insignia 65" LED TV
www.insigniaproducts.com
• TV Speakers—You can select:
• Auto—To automatically turn off the TV
speakers when an audio cable is connected
to the AUDIO OUT/ jack. When you
disconnect the cable, TV speakers
automatically turn on.
• On (default setting) to always play audio
through the TV speakers.
• Off to turn off the TV speakers.
• Digital Audio/SPDIF—Sends digital audio to an
external audio system. You can select:
• RAW (to pass through the original digital
audio sound).
• PCM (to output audio in 2-channel stereo).
• Digital Audio Delay—Fine tunes the audio
when it is not in sync with the video.
• MTS/SAP—(Analog channels only) Selects the
audio mode. You can select:
• Mono—Select this option if there is noise or
static on weak stereo broadcasts.
• Stereo—Select this option for programs
broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
• Audio Language—(Digital channels only)
Selects an alternate audio language, if available.
• Headphones/Audio Out—You can use the
AUDIO OUT/ jack on the side of your TV to
connect headphones, a home theater system, a
sound bar, or an external speaker system. When
a device is connected to the AUDIO OUT/ jack,
the TV speakers are muted. You can select:
• Headphones/Audio Out Variable—Select
this option to use the remote control that
came with your TV to control the audio from
headphones or the home theater system or
sound bar you connected to the
AUDIO OUT/ jack.
• Audio Out Fixed—Select this option to use
the remote control that came with the home
theater system or sound bar you connected
to the AUDIO OUT/ jack to control the
audio.
• Reset Audio Settings—Reset all audio settings
to factory defaults.
4 Press
W
or
X
to adjust the option, or press
S
or
T
to select a setting.
5 Press MENU to return to the previous menu, or
press EXIT to close the menu.
Selecting the audio out mode
If your TV is on when you connect a device to the
AUDIO OUT/ jack on the side of your TV, a screen
opens where you select which audio out mode you
want to use.
1 Connect headphones, a home theater system,
sound bar, or external speaker system to the
AUDIO OUT/ jack on the side of your TV. The
following screen opens.
2 Press
W
or
X
to highlight the audio out mode you
want to use, then press ENTER. You can select:
• Headphones/Audio Out Variable—Select this
option to use the remote control that came with
your TV to control the audio from headphones, a
home theater system, a sound bar, or an external
speaker system you connected to the
AUDIO OUT/ jack.
• Audio Out Fixed—Select this option to use the
remote control that came with the home theater
system, sound bar, or external speaker system
you connected to the AUDIO OUT/ jack to
control the audio.
Note
You can also press MTS/SAP one
or more times to select the
audio mode.