Filter
Top Products
VM8514
Volume
Control
To
increase the volume, turn the VOUSEUMENU (rotary encoder) (2)
clockwise.
To
decrease the volume, turn the rotary encoder counter-clockwise.
When
volume
is
adjusted, the volume level
is
shown on the display panel as a
number ranging from
"0" (lowest) to "40" (highest).
Steering
Wheel
Control
(SWC)
The VM8514 is compatible with the
PAC
(Pacific Accessory Corporation)
steering
wheel control adapter SWI-PS. A 3.5mm female connector (labeled
"SWC Interface")
on the back
of
the head unit allows connectivity to the PAC
adapter. Please refer to the instructions included with the
PAC
adapter for
detailed installation information.
SWC
Functions
The following controls are available for most vehicles:
1.
Vol Down
2.
Vol Up
3.
Mute
4.
Seek Down / Previous Track / ** Preset Down
5.
Seek Up / Next Track / ** Preset Up
6.
SRC (Source)
7.
** Select
8.
** Select
9.
Band
**
If additional steering wheel control buttons are available on the vehicle,
function
7/8
may be assigned the "Select" feature. This feature / function may
not
be
available on some vehicles.
Select
Operation
If "Select" (function 7
or
8) is held down and function 4 is pressed momentarily,
Preset Up is selected. If "Select" (function 7 or 8)
is
held down and function 5
is
pressed momentarily, Preset Down
is
selected.
Audio
Menu
Press the
VOUSEUMENU
button (2) to access the audio menu. Press the
VOUSEUMENU
button repeatedly to move through the list
of
menu options.
NOTE:
Audio
settings
only
apply
to the current source (Source Tone
Memory).
You
must
make audio adjustments
for
another source when that
source
is
active.
• Sub_w: When the Low Pass Filter
is
activated (see "Sub LPF (Low Pass
Frequency)" on page 12). you can use the
VOUSEUMENU
rotary
encoder to adjust the subwoofer
volume from "-14" to "0".
10