Filter
Top Products
VM8514
Select
a
Band
Press the
BAND
button (3)
on
the front panel or remote control (25) to change
between three FM and two AM bands. Each band stores up to six preset
stations.
Tuning
Seek Tuning
Press the TUNEITRACK »1 or
1«
buttons (17) on the front panel or remote
control (12) to seek the next/previous station automatically.
Manual Tuning
Press
and
hold
the TUNEITRACK »1 or
1«
buttons (17) on the front panel or
remote control (12) to enter Manual tuning mode. Press the buttons again to
move the radio frequency number up or down one step.
Program
Information
To
view available program information, press the PTY button (14) on the
control panel. Press repeatedly to choose between Program Type (PTY)
category, Program
Service station call letters (PS), and Radio Text (RT).
PTY
Search
To
view the Program Type categories, press and hold the PTY button (14) on
the control panel. Program type categories are listed at the bottom
of
the
screen, allowing listeners to find similar programming by genre. Press the
TUNEITRACK »1
or
1«
buttons (17) to select a category. After a few
seconds, the radio will start scanning for stations broadcasting
in
the selected
category.
NOTE:
Program
information
is
broadcaster
dependant.
Not
all
broadcasters
supply
accurate information.
Preset
Stations
up
to six stations on each band can
be
stored
as
presets, which can then be
instantly recalled by pressing the associated preset button (8-13).
To
store a
station, turn the radio on and select the desired band and station.
Press
and
hold the desired preset button (numbered one through six on the face
of
the
radio or remote control) for more than two seconds. When stored, the preset
number will appear
in
the display. The station
is
now stored and can
be
recalled by pressing the corresponding preset button. Repeat for the
remaining five presets on the current band and for presets on the other four
bands.
15