Filter
Top Products
VM8514
• Some mobile phones (like Sony Ericsson) may have a "Power Saving
Mode" option. PLEASE DO NOT use the power saving mode with the
VM8514.
• Before accepting or making a call, make sure your mobile phone's
"Bluetooth function" is turned on.
•
To
ensure the best conversation quality/performance, stay within one
meter
of
the BTM15 when talking.
• Phone
Book
direct
searching
through
the head
unit
is
only
available
if
the mobile
phone
supports
Phone
Book
Download. If the feature is
not supported, the head unit
will display "Phone book not provided by this
phone" when an attempt is made to
download a phone book.
Hands
Free
Profile
(HFP)
To
use a phone wirelessly with this unit, it is necessary to first establish a
connection using
Bluetooth wireless technology. Connection is normally
established
using HFP (Hands Free Profile), which gives you full control
of
functions available
on
the telephone source. However, depending
on
your
phone, the connection may be made using
HSP (Head Set Profile), making
some functions
unavailable. This is a limitation
of
your phone, not the VM8514.
Since there are a number
of
Bluetooth mobile phone implementations
available
on
the market, operations with your Bluetooth mobile phone using
this unit vary
greatly.
Please
refer to the instruction manual that came with your Bluetooth mobile
phone along with this manual while operating your phone with this unit.
Pairing
the
Bluetooth
System
with
Your
Mobile
Phone
and
Head
Unit
1.
Press the SRC button
on
the front panel (6) or remote control (14) and
select SOURCE »
BT.
2.
Press the
2/1NT
button (9) to initiate the pairing process. Keep the mobile
phone within 2 meters
of
the head unit when pairing.
(To
terminate the
pairing process, press the
INT button again.)
3.
Select the Bluetooth setup option on the mobile phone to be paired
(please refer to the phone's instruction manual to learn how to enter
Bluetooth setup, turn Bluetooth on/off, and perform pairing).
NOTE: Some
phones
require a
"pass
key"
or
pairing
code
to
connect.
If
your
phone
requires a
pass
key
or
pairing
code,
you
will
need
to
enter
this
number
in the Pairing Code
field
under
the
Bluetooth
SETUP menu.
The default
pairing
code
for
many
phones
is
"0000". The
default
code
for
the VM8514 is "1234". See
"Set
Pin Code " on
page
40
for
instructions
on
entering a
new
pin
code.
32