Filter
Top Products
VM8514
4.
Select "VM8514" from the pairing list
on
the mobile phone.
• If pairing is successful, the TFT will display the paired mobile phone
model number or name (as specified
in
your phone's Bluetooth Setup
menu).
• If pairing fails, "Phone Pairing Fail" is displayed at the bottom
of
the
screen.
Reconnecting
Once the Bluetooth device has been paired, you can press the connect RDM
button (11) on the front
panel or remote control (21).
Each time the RDM button (11) is pressed, the head unit
will automatically
reconnect or disconnect with the mobile phone (only
if
the mobile phone was
previously paired with the head unit).
Press and hold the RDM button to connecUdisconnect A2DP (if supported by
your
mobile device).
Managing
Incoming
Calls
When connected to a Bluetooth phone, the unit will mute audio output, pause
CD
play, and change to the Bluetooth screen when a call
is
received. An
incoming phone number
will appear at the top
of
the screen.
Answering
an
Incoming
Call
To
answer the call, press the press the
~
button on the front panel (16)
or
the GOTO button (19) on the remote control.
NOTE: The TALK
button
on
the
BTM15
can
be
used
to
answer
calls
or
hang
up.
For best reception, speak
loudly and clearly.
To
end the conversation, press the BAND button (3) on the control panel
or
the.
button (17) on the remote control. The screen will display the call
duration for 3 seconds, and then return to the previous mode.
Rejecting
an
Incoming
Call
Press the BAND button (3)
on
the control panel or
the.
button (17)
on
the
remote
control to reject
an
incoming call. The call will go directly to voice mail.
Volume
Control
To
increase
or
decrease the volume level, turn the VOL/SEL/MENU rotary
encoder (2) on the front
panel
or
press the VOL+I- buttons (10) on the remote
control.
33