Filter
Top Products
VM8514
• BASS: Turn the VOL/SEUMENU rotary encoder (2) to adjust the bass
level from "+7" to "-7".
•
TREBLE: Turn the VOL/SEL/MENU rotary encoder to adjust the treble
level
from "+7" to "-7".
•
BALANCE: Turn the VOL/SEL/MENU rotary encoder to adjust the balance
from "R 16" (full right) to "L 16" (full left).
•
FADER: Turn the VOL/SEL/MENU rotary encoder to adjust the fader from
"F16" (full front) to "R 16" (full rear).
The unit
automatically saves your changes and exits the audio control menu
after five seconds
of
inactivity.
Menu Operation
Press and hold the VOUSEUMENU button (2) for more than two seconds to
access the
SETTING MENU. Press the VOL/SEUMENU button to move
through the
following menu options: Equalizet, Loud Set, Beep Set, 12/24
Mode (clock), Mirror Image, Vol Mode, A-VOL, Sub LPF and Area Set. The
following procedures assume you have already accessed the menu.
Press the
VOUSEUMENU button to select the highlighted setting and move
to the next menu option.
Equalizer
The Equalizer function applies preset sound effects to the unit's audio output
signal. Turn the rotary encoder to select from the following equalizer options: .
"Off", "Rock", "Hip Hop", "Dance" and "Acoustic". With the equalizer function
activated, if bass or
treble is adjusted, the EO Mode will revert to "Off".
When the equalizer function is activated, the most recently selected bassI
treble levels cannot be adjusted. When the equalizer function is not active, the
unit
will return to the most recently selected bass and treble levels.
Loud
Set
When listening to music at low volumes, this feature will selectively boost
certain bass and
treble frequencies.
"Off"
is the default setting. Turn the rotary
encoder to
select "On".
Beep Set
The beep tone feature allows the selection
of
an audible beep tone to be heard
each time the menu
is
accessed. "On" is the default setting. Turn the rotary
encoder to
select "Off".
12124
Mode
This option allows selection
of
a 12 hour or 24 hour clock format. "12 Hours" is
the
default setting. Turn the rotary encoder to change to the 24 hour clock
format.
11