Filter
Top Products
VM8514
FRONT
PANEL
RELEASE
The front panel release button (4) releases the mechanism that holds the front
panel to the chassis.
Detaching the Front Panel
To
detach the front panel, perform the following steps:
1.
Press the power button (1) to turn the unit off.
2.
Press the front panel release button to flip the panel down.
3.
Grasp the right side to release the front panel and then pull it at an angle
to remove the left side from the chassis.
4.
Store the front panel in the supplied carrying case to protect it from dirt and
damage and take it with you to prevent theft.
Re-attaching the Front Panel
Before re-attaching the front panel, make sure the electrical terminals on the
back
of
the panel are free
of
dust and dirt, as debris could cause intermittent
operation or other malfunctions.
To
re-attach the front panel:
1.
With the panel laying flat (in the "open" position), insert the left side
of
the
. panel
in
place until correctly engaged.
2.
Gently press the right side
of
the panel until the mechanism locks it into
place.
3.
Lift upward to close the panel.
3