Filter
Top Products
17
ENGLISH
Other convenient tape
operations
Skipping blank portions on the tape
You can skip blank portions between the tunes
(Blank Skip).
1 Press MODE repeatedly until
“B.SKIP” appears.
2 Press SEL.
Each time you press the
button, skip function mode
turns on (“B.SKIP ON”) and
off (“B.SKIP OFF”) alternately.
When this function is on, the B.SKIP indicator
lights up on the display and the unit skips blank
portions of 15 seconds or more, fast-forwards to
the next tune, then starts playing it.
Playing the current tune repeatedly
You can play the current tune repeatedly
(Repeat Play).
1 Press MODE repeatedly until
“REPEAT” appears.
2 Press SEL.
Each time you press the
button, repeat play mode
turns on (“REPEAT ON”) and
off (“REPEAT OFF”)
alternately.
Notes:
In the following cases, Blank Skip and Repeat Play
may not operate correctly.
– Tapes with tunes having long pianissimo passages
(very quiet parts) or non-recorded portions during
tunes.
– Tapes with short non-recorded sections.
– Tapes with high level noise or humming between
tunes.
– The Dolby NR setting does not match. For example,
if the tape is recorded with the Dolby C NR.
Prohibiting tape ejection
You can prohibit the tape ejection and can “lock”
a tape in the cassette compartment.
While pressing TAPE/AUX, press
and hold TAPE 0 for more than
2 seconds. “TAPE ” flashes on
the display for a while, and the
tape is locked and cannot be
ejected.
To cancel the prohibition and “unlock” the
tape, press and hold TAPE 0 for more than 2
seconds again, while pressing TAPE/AUX.
“EJECT OK” flashes on the display for a while,
and the tape is “unlocked.”
DOLBY B
B.SKIP
REPEAT
Canceled
DOLBY B
B.SKIP
REPEAT
Canceled
EN15-17KW-XC777[J]7 01.12.7, 5:37 PM17