JVC KW-XC777 Car Stereo System User Manual


 
IMPORTANT For KW-XC777
Notice the following information will help you solve your problems.
Keep this IMPORTANT sheet together with the INSTRUCTIONS.
After installing the unit.
= Follow the procedure Å described below.
If the unit does not operate.
= Follow the procedure Å described below.
If a CD is not ejected from the loading slot.
= Follow the procedure ı described below. (If the procedure ı does not work, try
the procedure Å.)
If a CD is not recognized (“NO DISC” appears on the
display) even though there is a CD in the loading slot.
= Follow the procedure ı described below. (If the procedure ı does not work, try
the procedure Å.)
Å To reset the microcomputer
Press the reset button on the front panel using a ball-point pen or a similar tool.
This will reset the built-in microcomputer.
NOTE: Your preset adjustments — such as preset channels or sound
adjustments — will also be erased.
ı To eject a CD by force
Press and hold both the POWER / ATT (
ATT
/
) and CD 0 buttons at the
same time for several seconds until the EJECT appears on the display.
LVT0880-001A
EX
180
MP3
INPUT
CD 0
/ ATT )(
POWER / ATT
EX
180
MP3
INPUT
Reset button
KW-XC777IMPORTANT 01.11.29, 10:30 AM1