Filter
Top Products
ENGLISH
25
Turning the demo mode on or off
– DEMO MODE
You can turn the demo mode on or off. When
shipped from the factory, “DEMO ON” is selected.
• DEMO OFF: Turns the demo mode off.
• DEMO ON: Turns the demo mode on. The
demonstration will start
automatically if no sound comes
in for 3 minutes.
Note:
If the unit has been reset (and the power is on),
demonstration will start if no sound comes in for
about 15 seconds.
Assigning names to the sources
You can assign names to station frequencies and
the external component connected to the MP3
INPUT jack.
After assigning a name, it will appear on the
display when you select the source.
Sources Maximum number
of the characters
Station frequencies* Up to 10 characters
(up to 32 station
frequencies including
both FM and AM)
External components Up to 10 characters
(“AUX INPUT” only)
* You cannot assign name to a station frequency
stored in the EX (extra) button.
1
Select a source you want to assign a
name to.
When you select a
source, the power
automatically
comes on.
Each time you press the
button, the source
changes as described on
page 7.
2
Press and hold SEL (select) for more
than 2 seconds while pressing DISP
(display).
CONTINUED TO THE NEXT PAGE
(at the same time)
EN22-26KW-XC777[J]7 01.12.7, 5:38 PM25