Filter
Top Products
24
ENGLISH
Setting the clock display – CLOCK DISP
You can set the clock to be shown on the display
when the unit is turned off.
When shipped from the factory, the clock is set
not to be shown on the display.
• CLOCK OFF:Clock display is turned off.
• CLOCK ON: Clock display is turned on.
Note:
If the power supply is not interrupted by turning off
the ignition key of your car, it is recommended to
select “CLOCK OFF” to save the car’s battery.
Selecting the dimmer mode – DIMMER
When you turn on the car headlights, the display
automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer
mode is activated.
• DIM OFF: Cancels Auto Dimmer.
• DIM ON: Always dims the display.
• DIM AUTO: Activates Auto Dimmer.
Note:
Auto Dimmer equipped for this unit may not work
correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, set the dimmer mode to “DIM ON” or
“DIM OFF.”
Adjusting the display contrast level
– CONTRAST
You can adjust the display contrast level among 1
(dark) to 10 (bright). When shipped from the
factory, the display contrast level is set at level 5.
Selecting the scroll mode – SCROLL
You can select the scroll mode for the disc
information.
When shipped from the factory, Auto Scroll mode
is set to “SCRL ONCE.”
• SCRL ONCE:Scrolls only once.
• SCRL AUTO: Repeats the scroll (5-second
intervals in between).
• SCRL OFF: Cancels Auto Scroll.
Selecting the external component to use
– EXT INPUT
You can connect the external component to the
CD changer jack on the rear using the Line Input
Adaptor KS-U57 (not supplied).
To use the external component as the playback
source through this unit, you need to select which
component – CD changer or external component
– to use.
When shipped from the factory, CD changer is
selected as the external component.
• CD CHANGER: To use the CD changer.
• LINE INPUT: To use the external
component other than CD
changer.
Notes:
• If the current source is CD changer or external
component, this item does not appear.
• For connecting the Line Input Adaptor KS-U57 and
the external component, refer to the Installation/
Connection Manual (separate volume).
Adjusting the auxiliary input level
– AUX ADJ
Adjust the auxiliary input level properly when an
external component is connected to the MP3 INPUT
jack.
When shipped from the factory, the auxiliary input
level is set at level 00.
If the input level of the connected component is
not high enough, increase the input level properly.
Without adjusting the line input level, you may be
surprised at a loud sound when you change the
source from the external component to another
source.
EN22-26KW-XC777[J]7 01.12.7, 5:38 PM24