Filter
Top Products
8
ENGLISH
RADIO OPERATIONS
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Searching a station automatically:
Auto search
1
Select the band (FM1, FM2, FM3, or
AM).
Note:
This receiver has three FM bands (FM1, FM2, and
FM3). You can use any one of them to listen to an FM
broadcast.
2
Start searching a station.
To stop searching before a station is received,
press the same button you have pressed for
searching.
Searching a station manually:
Manual search
1
Select the band (FM1, FM2, FM3, or
AM).
2
Press and hold ¢ or 4
until “M (manual)” starts flashing on
the display.
3
Tune in to a station you want while
“M” is flashing.
• If you release your finger from the button, the
manual mode will automatically turn off after 5
seconds.
• If you hold down the button, the frequency
keeps changing (in 200 kHz intervals for FM
and 10 kHz for AM) until you release the
button.
EX
180
MP3
INPUT
Selected band appears.
When a station is received, searching
stops.
FM1
FM2
FM3
AM
To search stations of
higher frequencies
To search stations of
lower frequencies
Press ¢ to tune in
to stations of higher
frequencies.
Press 4 to tune in
to stations of lower
frequencies.
EN08-11KW-XC777[J]7 01.12.7, 5:37 PM8