Filter
Top Products
22
ENGLISH
OTHER MAIN FUNCTIONS
Changing general settings (PSM)
You can change the following settings for this unit
by using the PSM (Preferred Setting Mode) control.
Basic Procedure
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(See page 23.)
2
Select a PSM item you want to
adjust. (See page 23.)
3
Adjust the PSM item selected.
4
Repeat steps 2 and 3 to adjust the
other PSM items if necessary.
5
Finish the setting.
Setting the clock
After installation, set the built-in clock correctly.
1
Press and hold SEL (select) for more
than 2 seconds so that one of the PSM
items appears on the display. (See
page 23.)
2
If “CLOCK HOUR” does not appear,
press ¢
or 4
repeatedly
until it appears.
3
Adjust the hour.
4
Press ¢ or 4 until “CLOCK
MIN (minute)” appears on the display.
5
Adjust the minute.
6
Finish the setting.
To check the current clock time while the unit
is turned off, press DISP (display).
The power turns on, the clock time is shown for 5
seconds, then the power turns off.
EN22-26KW-XC777[J]7 01.12.7, 5:38 PM22