Filter
Top Products
OPERATIONS
33
ENGLISH
USB operations
You can connect a USB mass storage class device such as a USB memory, Digital Audio Player, etc. to the unit.
This unit can play the JPEG/MPEG1/MPEG2*/MP3/WMA files stored in USB mass storage class device.
• You can operate the USB device in the same way you operate the files on discs. (☞ pages 17 to 28)
• Playback will stop after playing back all tracks in the USB mass storage class device.
• If you start playback again after changing the source or turning off the unit, the playback starts from the first track.
• Make sure all important data has been backed up.
*
Except for MPEG2 files recorded by JVC Everio camcorder (extension code <.mod>).
~ Open the front cover.
Ÿ Connect a USB mass storage class device.
! Select “USB” for the source.
(☞ page 10)
• Open the monitor if necessary.
Caution:
• Avoid using the USB device if it might hinder your safety driving.
• Do not pull out and attach the USB device repeatedly while “Reading...” is displayed on the monitor screen.
• Do not start the car engine if a USB device is connected.
• Stop playback before disconnecting a USB device.
• Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or
cause damages to the device.
• For more details about USB operations, ☞ page 49
~
Ÿ
• You cannot connect a computer to
the USB ( ) terminal of the unit.
EN03_KD-AV7100_JW.indd 33EN03_KD-AV7100_JW.indd 33 08.7.14 2:41:37 PM08.7.14 2:41:37 PM