Kenwood DPX-4020 Car Stereo System User Manual


 
— 17 —
Playing CDs:
If no CDs are inserted, insert one in the slot with the label
facing up.
If a CD is already inserted, press the SRC button repeatedly to
select the CD mode.
"CD" is displayed when the CD mode has been selected.
The CD will start playing.
The indicator lights up when a CD has been inserted.
Pausing and Restarting CD Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
Stopping and Ejecting CDs:
Press the 0 button.
The CD stops playing and ejects from the slot.
Do not attempt to insert a CD into the slot if another one is
already there.
When you load a CD and eject it right away, the next time you try
to insert the CD may not load. In such a situation, take the CD
out for a moment and then reinsert it.
NOTE
2CAUTION
Playing CDs
This function permits the connection of optional players and
the playing of discs other than the loaded CD (in the current
unit).
Playing Discs:
Press the SRC button repeatedly to select the external disc
control mode.
The disc will start playing.
The external disc control mode will differ, depending on the unit
that is connected.
NOTE
Playing Other Disc mode
Mode Display Examples
"CD-CH"/"MD-CH"/"DISC-CH"...when a disc changer is
connected
"CD-CH1", "CD-CH2"/"MD-CH1", "MD-CH2"/"DISC-CH1", "DISC-
CH2"...when two disc changers are connected
Pausing and Restarting Disc Play:
Press the 38 button to make the disc pause.
Press the same button again to start play again.
When one disc has finished playing its last track, the next disc
in the changer will start playing. When the last disc in the
changer has finished, the player will return to the first disc and
start playing it.
Concerning the display during MD play
If the playtime goes beyond a 100 minutes, the last 2 digits of
playtime are displayed.
If the MD-LP recording format is “LP2” the indicator
light is ON, if it’s “LP4” the indicator light is ON.
NOTE
Fast Forwarding Disc Play:
Hold down on the ¢ button.
Release your finger to play the disc at that point.
Reversing Disc Play:
Hold down on the 4 button.
Release your finger to play the disc at the point.
You cannot use reverse play between tracks depending on the
model being connected. Instead, the reverse play function is
canceled when it reaches the beginning of a track, at which point
normal play will automatically resume.
NOTE
Fast Forwarding and Reversing Disc Play
03.DPX-4020_M_US_PH4 02.6.3 3:54 PM Page 17