Kenwood DPX-MP3120 Car Stereo System User Manual


 
22
|
DPX-U6120/ DPX-U5120/ DPX-MP3120
Operation of hands-free phoning
Calling a Number in the Call log
1
Enter Bluetooth mode
Press the [LOG] button for at least 1 second.
2
Select the call log mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Outgoing Calls (outgoing call),
“Incoming Calls (incoming call), or “Missed
Calls (missed call).
3
Select a name or phone number
Turn the [VOL] knob.
Switching between Display Modes
Press the [DISP] button.
4
Make a call
Press the [VOL] knob.
The outgoing call list and the incoming call list, and the
missed call list are the lists of calls originated from and
received at this unit. They are not the ones stored in the
cell-phone memory.
Dial a Number
1
Enter Bluetooth mode
Press the [LOG] button for at least 1 second.
2
Select the number dial mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Number Dial”.
3
Enter a phone number
Operation type Operation
Select the numbers. Turn the [VOL] knob.
Move to the next digit. Press the [
¢
] button.
Delete the last digit. Press the [
4
] button.
• Press the number ([1] – [0]), #([FM]), *([AM]), or
+([¢]) button on the remote controller.
To erase the entered phone number digit
by digit:
Press the [4] button on the remote
controller.
4
Make a call
• Press the [VOL] knob.
• Press the [DIRECT] button on the remote
controller.
You can input max 32 digits.
Make a Voice Dialing Call
1
Enter voice recognition mode
Press the [ATT] button for at least 1 second.
2
“PB Name?” is displayed.
When a beep is heard, say the name within 2
seconds.
3
“PN Type?” is displayed.
When a beep is heard, say the category name
within 2 seconds.
4
Make a call
Press the [VOL] knob.
This step is the same as step 4 of the procedure
in <Calling a Number in the Phone Book> (page
21). You can make a call or select a category.
If your voice cannot be recognized, a message is displayed.
Pressing the [VOL] knob allows you to retry voice input.
Refer to <Troubleshooting Guide> (page 56).
Both the name and category require registration of a voice
tag. Refer to <Setting a Voice Command for Category>
(page 46).
Audio sound is not output during voice recognition.
Registering to the Preset Dial Number
List
1
Select the phone number you wish to register
Select the phone number with reference to the
following:
- <Calling a Number in the Phone Book> (page 21)
- <Calling a Number in the Call log> (page 22)
- <Dial a Number> (page 22)
2
Select the number to put in the memory
Press the [1] – [6] button for at least 2 seconds.
Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory)
B64-4805-00_01_DPXU6120_M_en.indd 22 11/02/02 15:07