Filter
Top Products
English
|
41
Log Function category setting
Sets the function category to be logged.
1
Enter Function setting mode
Press the [VOL] knob.
2 Select the Log Function setting mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings” > “Log” > “Log settings”
3 Set the category to be logged
Category display Setting category
“Tuner Log” Radio-related
“Data CD Log” CD-related
“iPod Log” iPod-related
“USB Log” USB-related
“Phone Log” Call-related (KCA-BT200/BT300 only)
“Function Log” Function setting-related
Turn the [VOL] knob to select category, and
then press the [VOL] knob.
Check-mark (“✔”) the category you want to register.
4
Exit Function setting mode
Press the [ ] button for at least 1 second.
Tuner Log Function time setting
You can set the timing to log the station by the
reception time.
1
Enter Function setting mode
Press the [VOL] knob.
2 Select the Tuner Log time set mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings” > “Log” > “Tuner Log Time Set”
3 Set the reception time for the timing to start
logging the station
Turn the [VOL] knob to select time (“10SEC”,
“30SEC”, “1MIN”, “2MIN”, or “5MIN”), and then
press the [VOL] knob.
4
Exit Function setting mode
Press the [ ] button for at least 1 second.
B64-4805-00_01_DPXU6120_M_en.indd 41 11/02/02 15:07