Filter
Top Products
42
|
DPX-U6120/ DPX-U5120/ DPX-MP3120
Bluetooth Setup
Bluetooth Setting
You can select the following Bluetooth Setting
items.
1 Press the [LOG] button for at least 1 second.
2
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “Settings”.
3
Select the Setting item
Turn the [VOL] knob and press it when the
desired item is displayed.
Display Overview
“Settings”
“PAIRING”
“Device
Registration”
Register a Bluetooth device (pairing).
Refer to <Registering Bluetooth device>
(page 43).
“Phone
Selection”
Select a cell-phone or Bluetooth audio player
connection.
Refer to <Selecting the Bluetooth device You
Wish to Connect> (page 44).
“Audio Selection”
“Special Device
Select”
Register a Bluetooth device (pairing).
Refer to <Registering Bluetooth device>
(page 43).
“Device Delete” Cancel registration of the Bluetooth device.
Refer to <Deleting a Registered Bluetooth
device> (page 45).
“SMS Download” Download a short message.
Refer to <Downloading the SMS> (page 47).
“Voice Tag” Registers voice for voice recognition and voice
to select the Phone number category in Phone
book.
- <Adding a Voice Dialing Command> (page 46)
- <Setting a Voice Command for Category>
(page 46)
“Detailed Setup” Move to detailed item.
“PIN Code Edit” Specify the PIN code required when registering
this unit using the Bluetooth device.
Refer to <Registering PIN Code> (page 44).
“Auto Answer”
Answer a call automatically after lapse of the
preset time interval for automatic answer.
“OFF”/ “0SEC” – “8SEC” – “99SEC”
“Bluetooth HF/
Audio”
You can specify output speakers for hands-free
voice communication and Bluetooth audio
sound.
“Front”: Outputs voice from the front speakers.
“All”: Outputs voice from the front and rear
speakers.
“Call Beep”
You can output a beep from the speaker when
a call comes in.
“ON”: Beep is heard.
“OFF”: Beep is canceled.
“BT F/W Update” Display the version of the firmware of this unit.
“Mic Gain”*
Adjust the sensitivity of the microphone for a
telephone call. Adjust the voice of caller. Setting
to “+” increases the voice volume.
“–3” – “0” – “+3”
“NR Level”*
Reduce the noises generated by surrounding
environment without changing the microphone
volume. Adjust the voice of caller when it is
not clear. Setting to “+” increases the noise
reduction.
“–3” – “0” – “+3”
“Echo Cancel
Level“*
Adjust the level of echo cancellation. Setting to
“+” increases the echo cancel reduction.
“–2” – “0” – “+2”
( : Factory setting)
* Function of KCA-BT300
4
Make a setting
Turn the [VOL] knob to select a setting value,
and then press the [VOL] knob.
5
Exit BT Settings mode
Press the [LOG] button for at least 1 second.
Remarks
• “Auto Answer” (Setting the Time Interval for Automatic
Answer)
This function automatically answers (responds to) a call
after lapse of the preset time interval for automatic answer.
“OFF” : Does not answer the phone call automatically.
“0” : Automatically answers the phone call at once.
“1s” – “99s” : Automatically answers the phone call after
lapse of 1 – 99 seconds.
⁄
• If the time set in the cell-phone is shorter than that set in
the unit, the former will be used.
• This function does not work for call waiting.
• “Bluetooth HF/Audio” (Setting up the Voice Output
Speakers)
Select the speaker which is further from the microphone in
order to prevent howling or echoes.
• “BT F/W Update” (Displaying the Firmware Version)
Display the version of the firmware of this unit.
For how to update the firmware, access our web site.
http://www.kenwood.com/cs/ce/bt/
Function of DPX-U6120 with KCA-BT200/BT300 (Optional Accessory)
VOLLOG
4 ¢
B64-4805-00_01_DPXU6120_M_en.indd 42 11/02/02 15:07