Filter
Top Products
6
|
DPX-U6120/ DPX-U5120/ DPX-MP3120
Before Using
Canceling the Demonstration Mode
Cancel the demonstration mode when you use it for
the first time after installation.
1
Press the [VOL] knob to cancel the demonstration
mode when the messages “To cancel DEMO
press the volume knob”/ “CANCEL DEMO PRESS
VOLUME KNOB” are displayed (approx. 15
seconds).
2
Turn the [VOL] knob to select “YES” and press the
[VOL] knob.
⁄
• Demonstration mode can also be cancelled in “DEMO
Mode” of Function setting mode. Refer to <Demonstration
mode Setting> (page 31).
General operation
Adjusting the Clock
DPX-U6120
1
Press the [VOL] knob to enter the Function
setting mode.
2
The item can be selected and determined as
follows.
”Settings” ➜ “Clock & Date” ➜ “Clock Adjust”
To select the item, turn the [VOL] knob. To
determine the item, press the [VOL] knob.
3
Press [4] or [¢] button to select hour or
minute to set.
4
Turn the [VOL] knob to adjust the hour and
minute.
5
Press the [VOL] knob to finish the Clock
adjusting.
6
Press the [ ] knob for at least 1 second, and
then press it again briefly to exit the Function
setting mode.
DPX-U5120 DPX-MP3120
1
Press the [B.BOOST] button for at least 1 second.
2
Turn the [VOL] knob to adjust the hour, and then
press the [VOL] knob.
3
Turn the [VOL] knob to adjust the minute, and
then press the [VOL] knob.
DPX-U6120
DPX-U5120
SRC
VOL
iPod
B64-4805-00_01_DPXU6120_M_en.indd 6 11/02/02 15:07