Filter
Top Products
24
|
KDC-BT73DAB/ KDC-BT53U/ KDC-5057SD
English
|
25
5-10. DSP preset
You can register the values set the DSP control
items.
Set the DSP control items
Refer to the following operations to setup the
Sound Control.
- “SubWoofer Level” of <5-1. Audio control> (page
18)
- <5-2. Manual equalizer control> (page 19)
- <5-3. Car type selection> (page 19)
- <5-4. Speaker setting> (page 20)
- <5-5. X’Over setting> (page 20)
- <5-6. Listening position setting> (page 21)
- <5-7. Delay time control> (page 21)
- <5-8. Channel level fine adjustments> (page
22)
Press [Control] knob.
Enters the Function setting mode.
Select “Audio Control” > “Pro Setup” > “Audio
Preset” > “Memory” using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
Select a memory number (“Memory 1” or
“Memory 2”) using [Control] knob.
Select “YES” using [Control] knob.
“Memory Completed” appears.
Exiting from the Function setting mode
Press and hold [1/6].
When reset
• When this unit is reset, all setting values stored in “Memory
1” are applied to the source.
5-11. DSP preset recall
You can recall the DSP control items registered to
the <5-10. DSP preset> (page 24).
Press [SRC] to select a recall source.
Refer to <Source selection> (page 14).
Press [Control] knob.
Enters the Function setting mode.
Select “Audio Control” > “Pro Setup” > “Audio
Preset” > “Recall” using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
Select a recall memory number (“Recall 1” or
“Recall 2”) using [Control] knob.
Select “YES” using [Control] knob.
“Recall Completed” appears.
Exiting from the Function setting mode
Press and hold [1/6].
DSP settings (KDC-BT73DAB, KDC-BT53U)