Filter
Top Products
18
|
KDC-BT73DAB/ KDC-BT53U/ KDC-5057SD
English
|
19
“Sound Realizer” Virtually makes the sound more realistic
using the DSP.
“OFF”/ “Level1”/ “Level2”/ “Level3”
“Sound Elevation” Virtually raises the sound field using
the DSP.
“OFF”/ “Low”/ “Middle”/ “High”
“Volume offset” Sets each source’s volume as a difference
from the basic volume.
“–8” — “0” (AUX: “–8”— “+8”)
“Rear Mute” Sets the Rear channel Mute.
“ON”/ “OFF”
“SubWoofer Mute” Sets the Subwoofer Mute.
“ON”/ “OFF”
“Audio Preset” You can register the values set the Audio
control items.
Refer to <5-10. DSP preset> (page
24), <5-11. DSP preset recall> (page
24).
“Bass Boost”[4] Sets the Bass Boost level in 3 steps.
“OFF”/ “Level1”/ “Level2”/ “Level3”
“Loudness”[4] Makes the sounds at high and low
frequencies louder.
“OFF”/ “Low”/ “High”
“Balance” Adjusts left/right speaker balance.
“Left15” — “0” — “Right15”
“Fader” Adjusts front/rear speaker balance.
“Rear15” — “0” — “Front15”
(Colored text: Factory setting)
[1] You can select for each source.
[2] “User”: The Equalizer curve set in the section <5-2.
Manual equalizer control> (page 19) is recalled.
[3] This function is not effective for the Tuner and Digital
radio source.
[4] Displayed only when “DSP Set” is set to ”Through”.
[5] Audio file source only
Select a value using [Control] knob.
Exiting from the Function setting mode
Press and hold [1/6].
When you selected “iPod” for “Preset Equalizer”
• When you selected “iPod” for “Preset Equalizer”, next select
an equalizer curve. Select a desired equalizer curve using
[Control] knob from among 22 equalizer curves displayed
after you selected “iPod”.
5-1. Audio control
You can adjust the audio control items.
Press [SRC] to select a source other than
Standby (“STANDBY”).
Refer to <Source selection> (page 14).
Press [Control] knob.
Enters the Function setting mode.
Select “Audio Control” using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
Select a audio control item using [Control]
knob.
Display Overview
“SubWoofer Level” You can set subwoofer level.
“–15” — “0” — “+15”
“Preset Equalizer”[1][4] Select from among preset equalizer curves
to set the sound quality.
“User”[2]/ “Natural”/ “Rock”/ “Pops”/
“Easy”/ “Top 40”/ “Jazz”/ “Powerful”/
“iPod”(During iPod source only)
“Manual Equalizer””[1][4] Set the equalizer curve manually.
Refer to <5-2. Manual equalizer control>
(page 19).
“Pro Setup”
“DSP Set” Turn on/off the DSP function.
“Bypass”: Disables the DSP function.
“Through”: Enables the DSP function.
“Car Type”[4] To get clear sound, set the sound
environment according to the location and
size of physically installed speakers with
reference to the followings:
<5-3. Car type selection> (page 19)
<5-4. Speaker setting> (page 20)
<5-5. X’Over setting> (page 20)
<5-6. Listening position setting> (page
21)
<5-7. Delay time control> (page 21)
<5-8. Channel level fine adjustments>
(page 22)
<5-9. Resetting of DTA Settings> (page
23)
“Speaker Setting”[4]
“X’Over”[4]
“DTA Settings”[4]
“Sound Enhancements”[4]
“Supreme”[5] Turns ON/OFF the Supreme function.
Can be set while Audio file source of USB/
CD and iPod source.
“ON”/ “OFF”
“HIGHWAY-SOUND”
[3]
Compensates the low volume or bass
sound being lost by road noises to make
vocal sound clearer.
“OFF”/ “Low”/ “Middle”/ “High”
“Space Enhancer”[3] Virtually enhances the sound space using
the DSP.
“OFF”/ “Small”/ “Medium”/ “Large”
5-3. Car type selection
You can compensate the delay of the sound arrival
time by selecting your environment from the car
types.
Press [SRC] to select a source other than
Standby (“STANDBY”).
Refer to <Source selection> (page 14).
Press [Control] knob.
Enters the Function setting mode.
Select “Audio Control” > “Pro Setup” > “Car
Type” using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
Select a car type using [Control] knob.
Display Car type
“OFF” Not compensating.
“Compact” Compact car
“Sedan” Sedan
“Wagon” Station wagon
“Minivan” Minivan
“SUV” Sport-utility vehicle
“Passenger Van” Passenger van
Exiting from the Function setting mode
Press and hold [1/6].
To set the delay time finely
• You can compensate the distances in more details by using
<5-7. Delay time control> (page 22) function.
5-2. Manual equalizer control
You can adjust the equalizer curve manually.
Press [SRC] to select a source other than
Standby (“STANDBY”).
Refer to <Source selection> (page 14).
Press [Control] knob.
Enters the Function setting mode.
Select “Audio Control” > “Manual Equalizer”
using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
Select a equalizer control item using [Control]
knob.
Display Description Range
“Gain” Adjust the gain of each band. -9 – 0 – +9 dB
“Q Factor” Adjust Q of each band. 1.35/ 1.50/ 2.00
“Bass EXT” Adjust the gain of lower
frequencies than 62.5 Hz to the
level equivalent to 62.5 Hz.
“OFF”/ “ON”
(Colored text: Factory setting)
When “Bass EXT” and “Q Factor” are selected, skip
step 5.
Select a Band using [Control] knob.
“BAND1”; 62.5 Hz, “BAND2”; 100 Hz,
“BAND3”; 160 Hz, “BAND4”; 250 Hz,
“BAND5”; 400 Hz, “BAND6”; 630 Hz,
“BAND7”; 1 kHz, “BAND8”; 1.6 kHz,
“BAND9”; 2.5 kHz, “BAND10”; 4 kHz,
“BAND11”; 6.3 kHz, “BAND12”; 10 kHz,
“BAND13”; 16kHz
Select a value using [Control] knob.
Exiting from the Function setting mode
Press and hold [1/6].
When the “Manual Equalizer” item is not displayed
• This function is not available when “iPod” is selected for
“Preset Equalizer”.
5. DSP settings (KDC-BT73DAB, KDC-BT53U)