Filter
Top Products
16
|
KDC-BT73DAB/ KDC-BT53U/ KDC-5057SD
English
|
17
4. Audio adjustments (KDC-5057SD)
4-1. Audio control
You can adjust the audio control items.
Press [SRC] to select a source other than
Standby (“STANDBY”).
Refer to <Source selection> (page 14).
Press [Control] knob.
Enters the Function setting mode.
Select “Audio Control” using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
Select a audio control item using [Control]
knob.
Display Audio control item Range
“SubWoofer Level” Subwoofer level –15 — +15 (dB)
“Bass Level” Bass level –8 — +8 (dB)
“Middle Level” Middle level –8 — +8 (dB)
“Treble Level” Treble level –8 — +8 (dB)
“Equalizer PRO”
“Bass Adjust”
“Bass Center FRQ” Bass Center Frequency 60/ 80/ 100/ 200 (Hz)
“Bass Level” Bass level –8 — +8 (dB)
“Bass Q Factor” Bass Q Factor 1.00/ 1.25/ 1.50/ 2.00
“Bass EXT” Bass Extend OFF/ ON
“Middle Adjust”
“Middle Center
FRQ”
Middle Center
Frequency
0.5/ 1.0/ 1.5/ 2.5 (kHz)
“Middle Level” Middle level –8 — +8 (dB)
“Middle Q Factor” Middle Q Factor 0.75/ 1.00/ 1.25
“Treble Adjust”
“Treble Center
FRQ”
Treble Center
Frequency
10.0/ 12.5/ 15.0/
17.5 kHz
“Treble Level” Treble level –8 — +8 (dB)
“Preset Equalizer” Preset Equalizer curve “Rock”/ “Pops”/ “Easy”/
“Top40”/ “Jazz”/
”Powerful”/ “Natural”/
“User”[2]
“Bass Boost” Bass Boost “Level1”/ “Level2”/
”Level3”/ “OFF”
“Loudness” Loudness “Level1”/ “Level2”/
“OFF”
“Balance” Balance Left 15 — Right 15
“Fader” Fader Rear 15 — Front 15
“SubWoofer” Subwoofer output OFF/ ON
“Detailed Settings”
“HPF” High Pass Filter Through/ 100/ 120/
150 (Hz)
“LPF SubWoofer” Low Pass Filter 85/ 120/ 160/ Through
(Hz)
“SubWoofer
Phase”
Subwoofer Phase Reverse (180°)/
Normal (0°)
“Supreme”[3] Supreme setting ON/ OFF
“Audio Preset” Audio Preset
memory[1]
Recall/ Memory
“Volume Offset” Volume offset –8 — ±0 (dB)
(AUX: -8 — +8)
[1] Refer to <4-2. Audio preset> (page 17), <4-3. Audio
preset recall> (page 17).
[2] “User”: The customized Bass, Middle, and Treble settings
are effective.
[3] Audio file source only
Select a value using [Control] knob.
Returns to the previous item.
Exiting from the Function setting mode
Press and hold [1/6].
Adjusting Bass, Middle, and Treble levels
• You can set Bass, Middle, and Treble levels for each source.
4-2. Audio preset
You can register the values set the Audio control
items.
Set the audio control items
Refer to <4-1. Audio control> (page 16).
Select “Audio Control” > “Detailed Settings”
> “Audio Preset” > “Memory” using [Control]
knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
Select “YES” using [Control] knob.
“Memory Completed” appears.
Exiting from the Function setting mode
Press and hold [1/6].
Number of Audio preset memories that can be stored
• Register a pair of Audio preset memories. You cannot
register them by source.
When reset
• When you press the Reset button, audio control values of all
sources will be set to the values registered here.
Audio control items that can be registered
• The following Audio control items can be registered.
“Bass Center FRQ”, “Bass Level”, “Bass Q Factor”, “Bass EXT”,
“Middle Center FRQ”, “Middle Level”, “Middle Q Factor”,
“Treble Center FRQ”, “Treble Level”, “SubWoofer Level”, “HPF”,
“LPF SubWoofer”, “SubWoofer Phase”
4-3. Audio preset recall
You can recall the Audio control items registered to
the <4-2. Audio preset> (page 17).
Press [SRC] to select a recall source.
Refer to <Source selection> (page 14).
Press [Control] knob.
Enters the Function setting mode.
Select “Audio Control” > “Detailed Settings” >
“Audio Preset” > “Recall” using [Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 13).
Select “YES” using [Control] knob.
“Recall Completed” appears.
Exiting from the Function setting mode
Press and hold [1/6].