Filter
Top Products
36
|
KDC-BT73DAB/ KDC-BT53U/ KDC-5057SD
English
|
37
8. Listen to the CD/ Audio file
8-1. Playing music
Playing a disc
Open the Disc slot cover upward.
Insert a disc in the Disc slot.
When it is inserted, the source is switched
automatically and playback starts.
Close the Disc slot cover.
Playing a USB device
Connect a USB device to the USB terminal.
[1] Front USB terminal
[2] Rear USB terminal
[3] optional accessory
You can connect the iPod or USB device to either
one of the USB terminals provided at the front and
rear of this unit.
When it is connected, the source is switched
automatically and playback starts.
Playing a SD card (Function of KDC-5057SD)
Press the Release button and detach the
Faceplate. (Refer to <Detaching/ Attaching the
faceplate> (page 13))
Hold the SD card with the label side up and the
notched section on the right, and insert it into
the slot until it clicks.
[1] commercially available
Attaching the Faceplate.
Selecting an audio file folder
Press [R] or [S] button.
Selecting a song (track or file)
Press [E] or [F].
Fast-forwarding or fast-backwarding a song
(track or file)
Press and hold [E] or [F].
Pause and play a song (track or file)
Press and hold [1/6].
Removing disc
Open the Disc slot cover upward.
Press [G].
Removing USB device
Press [SRC] to switch the source to a device
other than USB, and then remove the USB
device.
Data contained in the USB device may be
damaged if you remove it when it is used as the
active source.
Removing SD card (Function of KDC-5057SD)
Press the Release button and detach the
Faceplate. (Refer to <Detaching/ Attaching the
faceplate> (page 13))
Push the SD card until it clicks and then remove
your finger from the card.
The card pops up so that you can pull it out with
your fingers.
Attaching the Faceplate.
8-3. Skip search
(Music Editor media <8-9. About “KENWOOD Music
Editor Light” and “KENWOOD Music Control”> (page
40))
You can search for a song by skipping songs at the
set skip search ratio (the ratio of the number of
songs to skip to the total number of songs in the
selected list).
Press [1/6].
“MUSICSEARCH” appears, and the Music search
mode is selected.
Press and hold [Control] knob.
Enter the Search select mode
Select “Skip Search” using [Control] knob.
Search for music
Operation type Operation
Movement between items Turn [Control] knob.
Skip search Press [R] or [S].
Selection of item Press [Control] knob.
Setting of skip search ratio Press [E] or [F].
Exiting from the Music search mode
Press and hold [1/6].
Skip search ratio setting
• You can also set the skip search ratio in the Function setting
mode. Refer to <8-4. Skip search ratio setting> (page 38).
8-2. Music search
You can select the music you want to listen to from
the device or media being played now.
Press [1/6].
“MUSICSEARCH” appears, and the Music search
mode is selected.
Search for music
Audio file
Operation type Operation
Movement between folders/files Turn [Control] knob.
Selection of folder/file Press [Control] knob.
Return to previous folder Press [1/6].
Return to root folder Press and hold [E].
Cancellation of Music search mode Press and hold [1/6].
- indicator: Audio file
; indicator: Folder
CD source
Operation type Operation
Movement between track Turn [Control] knob.
Selection of track Press [Control] knob.
Return to first track Press and hold [E].
Cancellation of Music
search mode
Press [1/6].
When two USB memories are connected
• When two USB memories are connected, you can search for
a song in both USB memories. When database information
is added using KENWOOD Music Editor (<8-9. About
“KENWOOD Music Editor Light” and “KENWOOD Music
Control”> (page 40)), you can search a song in only one
USB memory.